What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 03:43
[old diagram got deleted by accident]
eight
There are three different concepts here that are getting confused.
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
A circuit breaker is similar, but is resettable.
First Sentence:
These devices are installed between the “hot” and “neutral” and protective ground.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What do bad boys know that nice guys don't?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
I post the exact comment here.
HIV Drugs Linked to Lower Alzheimer’s Risk - Neuroscience News
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is where the MOV conducts again, and dissipated the energy.
Person with measles visited Boston hotel, museum, airport, health officials warn - NBC Boston
[image of Common-mode choke]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
At one ohm, the resistor has a maximum of 1 watt power.
What was your most embarrassing wardrobe malfunction in public?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
(Dc diagram shown, AC is similar).
Here is a simplified AC power diagram.
Colts will induct Jim Irsay into their Ring of Honor in Week One - NBC Sports
This is where this question deviates from being a 'generic' question, and becomes more specific.
For this case there are devices called Metal oxide varistors (MOV).
the problem then depends on "how fast does the fuse operate?".
A fuse is a non-resetable over current circuit protector.
It also is a device that limits the change in current flow.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
He then describes Rainy Season and Lightning.
In schematic diagrams this is the symbol for a fuse:
“Very Odd” New Sea Monster Identified After Decades of Mystery - SciTechDaily
These are simplified answers to the original question, and does not change anything I wrote above.
so, what happens?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Warming climate may flip the script on the amount of CO₂ released by trees, study finds - Phys.org
One
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Upvotes:
Packers waive receiver, open up roster spot - Acme Packing Company
But it can get overloaded, and no longer works.
An AC voltage/ current source, and an ac inductive load.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Have you ever witnessed a remote beach show where hundreds of turtles crawling to the water?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At least they know the answer if they wanted it.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
but I think this circuit , shows a few more pieces.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The third is lightning and “how it gets conducted into a home.”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
a photo is worth a thousand words.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
He then asserts :
2024–10–10[John johnson John Johnson ]
2024–10–14 [Omar Gharbi Omar Gharbi ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This device then solves the entire problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
He then describes the function of a fuse.
This is 'the assistant's answer'
Now when you have a certain ac resistance, then a current flows in a loop.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
This one hit behind the barn.
Edit 2024–10.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
The bolt then partially travels down the line to your home.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
But… the neutral is now “floating” because of the 1 ohm resistance.
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
nine
The other is “what does a “fuse” do?”
but this device (an Inductor) … impedes the rapid changes in the current.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What is lightning?